Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

Flywheel Quickie!!!

Thread Tools
 
Search this Thread
 
Old May 16, 2007 | 07:01 AM
  #1  
Mr.EM1_EK's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 780
Likes: 0
From: west palm beach, us
Default Flywheel Quickie!!!

i am about to change my clutch out. i just wanted to know if it is really necessary to resurface my flywheel? i don't want to much down time that why i asked. if it is not resurfaced what problems can i run into? thanks
Reply
Old May 16, 2007 | 07:33 AM
  #2  
deftonerider's Avatar
Junior Member
 
Joined: Oct 2006
Posts: 230
Likes: 0
From: Northridge, ca, USA
Default

it;s a good idea, do you really want to do it all over again because you didn't want to take it off and spend 20 more dollars
Reply
Old May 16, 2007 | 07:48 AM
  #3  
Mr.EM1_EK's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2007
Posts: 780
Likes: 0
From: west palm beach, us
Default Re: (deftonerider)

no, i want to do it, just wondering what is the downsides if i didn't.
Reply
Old May 16, 2007 | 11:29 AM
  #4  
4g hatch's Avatar
Honda-Tech Member
 
Joined: Apr 2007
Posts: 2,528
Likes: 1
From: back woods, va, usa
Default

there are no downsides just take it to a good machine shop you'll be fine
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gagedally
Honda Civic (2001 - 2005)
7
Mar 12, 2013 04:03 PM
Emorales
Honda Civic / Del Sol (1992 - 2000)
3
Oct 7, 2009 07:14 AM
patastinky
Honda Accord (1990 - 2002)
1
Feb 28, 2004 06:13 AM
See Are X
Tech / Misc
3
Jun 22, 2003 02:08 PM




All times are GMT -8. The time now is 06:32 PM.