Fly Wheel from 94 GSR and 90 Integra the same?

Reply Subscribe

Thread Tools

Search this Thread

Nov 19, 2003 | 10:13 AM

BrokenLimits

Thread Starter

Honda-Tech Member

Joined: Oct 2002

Posts: 1,080

Likes: 0

From: South Dakota

Fly Wheel from 94 GSR and 90 Integra the same?

Pretty much asking if the flywheels are the same from a 1994 Integra GSR and a 1990 Integra....

I wanna say they are because all B series motors are but I wanted to make sure...

Nov 19, 2003 | 11:15 AM

AGGRESSIVEDA9

Joined: Apr 2003

Posts: 20

Likes: 0

From: NEWARK, NJ, USA

Re: Fly Wheel from 94 GSR and 90 Integra the same? (BrokenLimits)

USED A GSR LIGHTIN FLYWHEEL ON MY LS/VTEC WITH A 91 BLOCK IT SHOULD BE THE SAME

Nov 19, 2003 | 12:19 PM

roadawg

Joined: Feb 2003

Posts: 2,136

Likes: 0

From: North NJ, usa

Re: Fly Wheel from 94 GSR and 90 Integra the same? (BrokenLimits)

Yes, it will work.

Nov 19, 2003 | 05:17 PM

Rusty Shackleford

Joined: Sep 2002

Posts: 180

Likes: 0

From: MD, US

Re: Fly Wheel from 94 GSR and 90 Integra the same? (hybrid honda)

yea they should work...however, wouldnt they be balanced differently? i mean both cranks are similar, but not the same...would there be an issue here or am i just looking too far into it?

Nov 19, 2003 | 05:20 PM

Colin

Honda-Tech Member

iTrader: (1)

Joined: Oct 2001

Posts: 2,473

Likes: 0

From: Long Beach, ca, usa

Re: Fly Wheel from 94 GSR and 90 Integra the same? (Rusty Shackleford)

flywheels are balanced independent of the rest of the motor, so no, if it was balanced and worked on one motor, it will be fine when you swap it to another.