ok so here it is.

ive decided to build a c5 i have sitting around the house, but i have some questions on what im going to do and need some guidence in doing so.

i would like to run about 12:0-12:5 compression
eagle rods, acl bearings

i allready have a lsvtec thats about to take a ****, the head im using is a 2000 b16a with portflow headwork, jun valve train, toda spec c's and i will also be getting a valve job while the head is off

my questions are will i have to do any combustion chamber work with the compression i would like to run?
will i have to worry about the valves hitting pistons i was reading about deck clearance will i have to worry about that

any advice or tips are much appreciated

 

THe chamber should be polished if Tom set you up right. I thought that was part of it.
While your doing the vavle job, have em do the chambers if he didnt already.

As for Piston-valve clearance, I think that you need to talk to a piston manufacturer or wholesaler. Maybe talk to a well known shop for help ordering what you need.

I'm sorry that is all the help I can give.

 

thanks for the advice and tom did polish my comb. chambers
any more advice