(ELD) ELECTRICAL LOAD DETECTOR?? Code 20, wtf is that? HELP
Electrical Load Detector (ELD) off a 99-00 civic hb.
where is this or how can i fix it. i think its makin my lights flicker and dim. i read that it may also make my speedo go all crazy which itpretty much does.
where is this amd how can i fix this problem, got emissions next week.
or should i just try puttin in another fuse bos in the engine bay.. since the eld is built into that...
where is this or how can i fix it. i think its makin my lights flicker and dim. i read that it may also make my speedo go all crazy which itpretty much does.
where is this amd how can i fix this problem, got emissions next week.
or should i just try puttin in another fuse bos in the engine bay.. since the eld is built into that...
The ELD is built into the under=hood fuse box, so you have to replace that. But first, check to see if there's a wiring problem between that ELD & the ECU.
I don't think the ELD would cause the speedometer to go flaky. Check the vehicle-speed sensor (VSS) on the tranny.
I don't think the ELD would cause the speedometer to go flaky. Check the vehicle-speed sensor (VSS) on the tranny.
i already have changed checked the speedo with a working one and it didnt do anything. and also changed in a wrkin gauge cluster, nothing... i have all the part since i wrk at a wrkecin yard, just dont know where the problem is at..
look under the dash and see if the alt fuse is blown
i had this same problem and it was cause i had halos wired into my lights... i uped the alt fuse and wired the halos into the parking lights and it hasnt done it since
i had this same problem and it was cause i had halos wired into my lights... i uped the alt fuse and wired the halos into the parking lights and it hasnt done it since
Trending Topics
it is going to blow again eventually
udner the engine where the harness goes between the manifold and the brace it has probably rubbed a spot where the wires can ground to teh brace. usually taping it up will solve this problem.
udner the engine where the harness goes between the manifold and the brace it has probably rubbed a spot where the wires can ground to teh brace. usually taping it up will solve this problem.
Thread
Thread Starter
Forum
Replies
Last Post
wjelmer
Honda Civic / Del Sol (1992 - 2000)
2
Nov 3, 2006 01:50 AM




