aiight well i had my starter go out about a month ago...went and roll started it to take it to the garage...started up fine....so i drove it not even a half mile to the garage and parked it......so i got the starter come back...replaced it...replaced valve cover spark plugs spark plug wires...now for some reason when i try to start it...it just cranks and cranks and cranks.....there was no smoke or anything and im trying to narrow down the possiblities....i am defin gonna change the timing belt since it seems alil stretch and could have possible jump time....also it could be my dizzy thats bad....anyone have suggestions on how to find out the main problem...or am i looking at putting it in time again with new time belt and then changing dizzy


car is a 91si hatchback with a b18a1 swap with b1 camsn and intake mani

 

when u changed the wires did u get the right firing order?
u could of mixed up the wires and now thats why it wont start...btw nice name hahah

 

hahahah thats awesome lol.....no i got the right firing order cause the wires never all came off the dizzy just changed one at a time so that wouldnt happen plus i know the correct firing order for the motor.....just was running one minute and then 30 minutes later not running....