i was planning on chipping my ecu but i just want to know how hard it is. and also what do i get i was looking at a website that sells chippoing kits and it said something about select an Eprom here is the website https://honda-tech.com/zero...id=15 is that kit good

my car is a 93 civic ex OBD1

 

The real question is have you desoldered and soldered circuit boards before.It's easy to make yourself a nightmare with a marginal soldering job.There are plenty of good people willing to chip it for short money.If your just doing one or two for yourself its cheaper to have someone else do it.
Glenn

 

i went to school for electronics so i solder thin for 4 years. i just dont know where to look for shops that do thing like that

 

http://www.pgmfi.org/

 

"said something about select an Eprom " and you were in electronics for how long?

 

you will need a 29c256 eprom chip. Also a eprom chip is a erasable read only memory chip. wich means it will retain knowlage when there is no power to it. But can be erased by exposeure to ultra violet light.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2k.civic.si &raquo;</TD></TR><TR><TD CLASS="quote">"said something about select an Eprom " and you were in electronics for how long?</TD></TR></TABLE>
i dident really pay attention all the time

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rainforest &raquo;</TD></TR><TR><TD CLASS="quote">you will need a 29c256 eprom chip. Also a eprom chip is a erasable read only memory chip. wich means it will retain knowlage when there is no power to it. But can be erased by exposeure to ultra violet light.</TD></TR></TABLE> thanks for the advice

i posted the wrong website before does this kit look legit http://www.xenocron.com/produc...gkits

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rainforest &raquo;</TD></TR><TR><TD CLASS="quote">you will need a 29c256 eprom chip. Also a eprom chip is a erasable read only memory chip. wich means it will retain knowlage when there is no power to it. But can be erased by exposeure to ultra violet light.</TD></TR></TABLE>

You don't need a 29c256, the atmels are so hard to find these days, and also more expensive, I use 27c512 because they're less than a buck so I got 5 of them plus some other crap shipped for the cost of a 27c256 before shipping. I just use the 27c512 when I chip stuff, cuz it only takes a while to erase with a proper eraser. The xenocron kit is legit, I'd get it from moates.net though since it's cheaper.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rainforest &raquo;</TD></TR><TR><TD CLASS="quote">you will need a 29c256 eprom chip. Also a eprom chip is a erasable read only memory chip. wich means it will retain knowlage when there is no power to it. But can be erased by exposeure to ultra violet light.</TD></TR></TABLE>

the 29c256 is electronicly erasable...the 27c256 is the one with a quartz window on top for uv erase...i get bags of the 27c256's for dirt cheap...the 29c256's go for about 6 bucks a pop

 

Yep, gotta love the cheap method. I always just have a bunch so I can write them and leave the others erasing and I'll never need to wait.

 

Hey this Drew from spartanburg SC. Do you know any thing about a DOHC ecu

 

Hey Civic-Si do you know any thing about DOHC ecu on SOHC engine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2DoorBandit &raquo;</TD></TR><TR><TD CLASS="quote">i dident really pay attention all the time
</TD></TR></TABLE>

but for 4 years? What kind of school did you go to!?