Dynamic vs. Static Compression
Thread Starter
moderator emeritus
Joined: Oct 2002
Posts: 16,357
Likes: 6
From: Cantonment, FL
Dynamic vs. Static Compression
ok i did a little searching around because im not familiar with these terms. In my searching i found people talking about them but never really explained what the differences are in detail.
I'm in a huge learning phase right now (currently reading a few books as well) and im wanting to learn about this topic since it has a little to do what i am reading about.
I'm in a huge learning phase right now (currently reading a few books as well) and im wanting to learn about this topic since it has a little to do what i am reading about.
Joined: Apr 2006
Posts: 192
Likes: 0
From: leominster, ma, usa
Re: Dynamic vs. Static Compression (98vtec)
theres a good write up on http://hondaswap.comi forgot which section but use the search
Honda-Tech Member
Joined: Mar 2003
Posts: 3,333
Likes: 0
From: Hudson, NH, 03051
Re: Dynamic vs. Static Compression (98vtec)
http://kb-silvolite.com/index2.php
Lots of piston tech.They refer to dynamic compression as effective compression ratio.
Lots of piston tech.They refer to dynamic compression as effective compression ratio.
Thread
Thread Starter
Forum
Replies
Last Post