well im in the process of converting to mpfi and i did everything i was told to off of
http://www.50mod.com/fourthgenhatch/mpfi.html
and now it wont rev past 2500

so i started checking voltage and everything is getting power except for the wires i had to run from the ecu for the crank angle sensor

so my question is should i be getting power from the ecu for the crank angle sensor or are there other things that might cause it from not reving past 2500 excluding the tps sensor
thankss

 

your tps can cause it to not rev, did u make sure u switched the TPS wiring, another can be if u got the two wires that go to the distrib backwards