took some pix of the D16z6 head I just bought, and I don't know if the valves are bent or not. Took some pictures of it, but I don't know the source codes...so I'll just put them up here to click on. Let me know. Thanks.

http://www.imagestation.com/al...idx=2
http://www.imagestation.com/al...idx=3
http://www.imagestation.com/al...idx=4
http://www.imagestation.com/al...idx=5
http://www.imagestation.com/al...idx=6

 

Remove or rotate the cam so all the valves in a cylinder are closed.Install a spark plug and pour some water in the chamber.If it runs out the intake or exhaust port the valve may be bent.Or take it to an automotive machine shop and have them take a look.
Glenn

 

thanks.