I got a d16y7 motor in my crx and its gonna be runnin a a6 ecu. My question is, is the only dist i can use the a6?

Yager-

 

with the a6 ecu you can only run an a6 ecu.

 

are you 100% of that? Someone else told me I could run a hf dist.


Yager-

 

ummm am i reading this right? he just repeated the same thing twice

 

Im sure he meant a6 dist.....


Yager-


[Modified by ImportHatch, 11:42 PM 11/12/2002]

 

ttt

 

I personally, performed this exact swap in an 89 Si hatchback a few months ago. We retained the Si/D16A6 distributor which bolted right up to the Y7 head, no problemo. The tricky thing was the spark plug wire configuration...it was a little funky but it works.

Actually, you should be able to use any 88-91 SOHC distributor on a Y7 head, but I strongly suggest you stick with a distributor that came from a multi-port fuel injected (4 injectors) engine (Si or HF).....as the dual-point engines have a distributor with a square plug and can make things difficult.


[Modified by Katman, 12:46 PM 11/13/2002]

 

Thank you Katman, Just the info that I have been lookin for.


Yager-

 

word up.