did not clay my b20vtec
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 291
Likes: 0
From: Evlett, WA
did not clay my b20vtec
im running a b20vtec with 11.5:1 je pistons, itr cams, on a gsr head with stock valves. the motor is already in my car and its been running. now will i run into problems later on if i upgrade my cams or is the pistons okay for my setup?
Joined: Mar 2002
Posts: 1,792
Likes: 0
From: Honolulu, HI, USA
Re: did not clay my b20vtec (b20izzle)
It really depends, has the head been milled, block decked? You might run into problems if you upgrade your cams later. In my opinion, you should ALWAYS check all tolerances including claying the motor. Cams are not just a bolt in affair like most people think, there is a little more precision to it.
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 291
Likes: 0
From: Evlett, WA
Re: did not clay my b20vtec (SilverCivic2k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SilverCivic2k »</TD></TR><TR><TD CLASS="quote">It really depends, has the head been milled, block decked? You might run into problems if you upgrade your cams later. </TD></TR></TABLE>
no its just been sleeved thats all. when i get my new cams i will clay it.
no its just been sleeved thats all. when i get my new cams i will clay it.
Thread
Thread Starter
Forum
Replies
Last Post
