I search it on the forum but i found nothing ...

so I've got a prob.

I can't start my engine ... Got fuel in the fuel rail ... but the injector don't want to spit fuel .

So ... you've got a common ground for the injector clip which goes to the dead end ( at the right of the clutch liquid ).

At this dead end you've got 8 wires ... 4 are for the injectors ... Do you know for the 4 else ??? ( in those 4 else i've got 2 right and 2 which are at 1 and 1,4 v ... :s

Sorry if it's not really comprehensible but i've made my best

Thanks

 

Typically, the injectors are all fed a constant voltage. The ECU grounds them individually as required to charge the cylinders.

 

I saw and got an old problem with my old motor with the mai relay ( fuel pump wasn't working ) . But could the main relay make the injectors doesn't work ?

 

It could, but your ECU would throw a code for that. Code 16 on 4th gens.

 

Thanks ...

EDIT:

Found !

I've got to try with the stock injector , another ecu and another main relay .

Is it possible that the injector are " blocked " or something ? ( brand new precision 525 cc 12ohms so on a EG6 that's ok )

Thx




Modified by panta83 at 1:44 AM 10/26/2006