DC5-R pistons
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: Cuyahoga Falls, Ohio, USA
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
DC5-R pistons
I'm planning on building up an N/A F23 with these pistons, crower rods. I already have the rods but my question is, will I need to have the pistons repinned or anything to work with the aftermarket rods? Also, what are the specs on these pistons as far as compression (stock) and dome height/volume? I know they use the same bore and compression height as the F23 (86mm, and 1.181 CH) but other than that I don't know much else about them.
Also, if anyone could help me figure out the compression ratio if I used these I'd appreciate it.
Also, if anyone could help me figure out the compression ratio if I used these I'd appreciate it.
Thread
Thread Starter
Forum
Replies
Last Post
spun Vtec
For Sale
6
10-25-2004 08:15 PM