dart block?
Thread Starter
Joined: Jun 2003
Posts: 1,351
Likes: 0
From: Fremont, CA
dart block?
ok i have a dart block.. in the process of building right now... but would i need a girdle? and if i did get one.. would i need to get a gsr windage tray and oil pick up? also would i need to get a gsr oil pan.. or could i run my ls oil pan...
Member
Joined: Dec 2002
Posts: 1,901
Likes: 0
From: Come to the, DarkSide
Re: dart block? (LBR92DA-T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LBR92DA-T »</TD></TR><TR><TD CLASS="quote">ok i have a dart block.. in the process of building right now... but would i need a girdle? and if i did get one.. would i need to get a gsr windage tray and oil pick up? also would i need to get a gsr oil pan.. or could i run my ls oil pan... </TD></TR></TABLE>
no you dont need a gridle. those steel main caps you'll be fine.
yeha just get a GSR oil pan and GSR pick up.
thats what i have on my dart block build.
no you dont need a gridle. those steel main caps you'll be fine.
yeha just get a GSR oil pan and GSR pick up.
thats what i have on my dart block build.
Senior Member
Joined: Oct 2003
Posts: 10,289
Likes: 1
From: Hendersonville, NC
Re: (LBR92DA-T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LBR92DA-T »</TD></TR><TR><TD CLASS="quote">yea i just talked to my machinist.. he told me the exact same thing... would it be best to have a gsr oil pick up and pan? </TD></TR></TABLE>
If you don't go with aftermarket stuff, then yes.
If you don't go with aftermarket stuff, then yes.
Thread
Thread Starter
Forum
Replies
Last Post
cthan3o3
All Motor / Naturally Aspirated
5
Aug 21, 2005 04:35 PM