d16y8 build
Thread Starter
Honda-Tech Member
Joined: Jun 2004
Posts: 127
Likes: 0
d16y8 build
Hey im new but im building a d16y8 and with a vortech supercharger,i want to get some ideas and some advice on the supercharging because the d16y8 in high compression and ive heard thtat to turbo or super a d16 you need to sleeve the pistons,get new pistons many many things but i want to hear input on others who have built their d16's so any and all advice is extremely helpful!
Joined: Jan 2002
Posts: 209
Likes: 0
From: ON, Canada
Re: d16y8 build (Tofu94)
I suggest going turbo instead. There's a lot of info in this site. Search for Turbo in the Forced Induction section. You'll find all the info you need. You can also go to d-series.org.
Junior Member
Joined: Jun 2003
Posts: 440
Likes: 0
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
do more research on how each setup works.
turbo vs Supercharger and figure out which is best for you. each has their own advantages which might match your needs.
also, its hard to gauge what to recommend to you if we dont know your goals and budget. There are so many different ways to go about building up the motor. it all depends on the amount of $$ you want to spend.
turbo vs Supercharger and figure out which is best for you. each has their own advantages which might match your needs.
also, its hard to gauge what to recommend to you if we dont know your goals and budget. There are so many different ways to go about building up the motor. it all depends on the amount of $$ you want to spend.
Thread
Thread Starter
Forum
Replies
Last Post
ramz7887
Forced Induction
2
Jun 4, 2003 12:14 PM
