Recently tearing down my head, i found my cam was all eat up, is there any place that makes aftermarket cams for a d15b2?

 

In the past JG had regrinds availble, im sure we could help you locate them

 

drop in an si cam and adj. camgear, slightly more aggresive and cheap
if you want an aftermarket one though, check out exospeed.com

 

88 to 89 si crx cam fits right up dont need a cam gear......

 

you need a cam gear because the timing is a half tooth off due to the shorter block, it will run with out a cam gear but will run alot better with it.
check out mista bone's camparison (he is the orignator of this mod)http://home.cinci.rr.com/mistab0ne/dyno.html

 

depending on how "eat up" your cam is maybe you can have it reground. call delta cams, the # is on here...http://www.deltacam.com


Modified by fastcrxsi90 at 7:52 PM 1/16/2004

 

A lot of cam companies will custom make you a cam, all you have to do is ask, and pay.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kendall &raquo;</TD></TR><TR><TD CLASS="quote">A lot of cam companies will custom make you a cam, all you have to do is ask, and pay.</TD></TR></TABLE>

will i pay out the *** for a custom grind?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94prelude &raquo;</TD></TR><TR><TD CLASS="quote">

will i pay out the *** for a custom grind?</TD></TR></TABLE>

yes you will

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94prelude &raquo;</TD></TR><TR><TD CLASS="quote">

will i pay out the *** for a custom grind?</TD></TR></TABLE>

the deltacam was about $100 with the shipping to and from.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 94prelude &raquo;</TD></TR><TR><TD CLASS="quote">will i pay out the *** for a custom grind?</TD></TR></TABLE>

It depends on which company you get. Some companies are small and will make you custom parts for a low price, probably $100-$200. Larger companies, like Crower, Crane, etc, would probably charge upwards up $300 or more for a custom cam.

 

Wil from Exospeed says he's taking b2 cams for regrinds and hes got a decent sale goin on, 25% off roughly. So about 150 for a better than stock profile.