D Series swap question

Reply Subscribe

Thread Tools

Search this Thread

May 26, 2004 | 08:45 PM

emark4

Thread Starter

Joined: Mar 2004

Posts: 150

Likes: 0

From: streamwood, il, usa

D Series swap question

hey whats goin on i need some help ok so im putting a 95 d16z6 in my 94 cx so no big deal right... i need some help tho on the wiring i dont know how to make the vtec engage what do i need to do to my stock harness? thanks for your help guys i did a search but all i got were b16 swap info

May 27, 2004 | 07:16 AM

tgreaves

Member

Joined: Aug 2001

Posts: 5,084

Likes: 0

From: Baltimore, maryland, usa

Re: D Series swap question (markydeg)

You can follow the same guidelines that everyone uses for the B16 swap.. All your doing it sending 12 volts to the vtec noid at a certant rpm..

May 27, 2004 | 07:37 AM

Kendall

Senior Member

Joined: Oct 2003

Posts: 10,289

Likes: 1

From: Hendersonville, NC

You'll need to run 3 wires for VTEC, one from the solenoid, one from the pressure switch, and a chassis ground. Also, you may have to add/relengthen some wires to get the O2 sensor sorted out.

May 27, 2004 | 08:41 AM

tgreaves

Member

Joined: Aug 2001

Posts: 5,084

Likes: 0

From: Baltimore, maryland, usa

Re: (Kendall)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kendall »</TD></TR><TR><TD CLASS="quote">You'll need to run 3 wires for VTEC, one from the solenoid, one from the pressure switch, and a chassis ground. Also, you may have to add/relengthen some wires to get the O2 sensor sorted out.</TD></TR></TABLE>

Whats different with the o2 sensor.. Its an obd1 car??