im puttin ctr pistons in my gsr, what is the proper ring gap i need?
pleas ei need ot know

 

bump damnit

 

0.004 MILLIMETER FOR EACH CENTIMETER OF BORE DIAMETER. YOU DO THE MATH.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by myhatchrips &raquo;</TD></TR><TR><TD CLASS="quote">0.004 MILLIMETER FOR EACH CENTIMETER OF BORE DIAMETER. YOU DO THE MATH. </TD></TR></TABLE>

Um, not sure I would trust a motor to that, but it should be about the same as a stock B16's end gaps.