Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

ctr pistons in a gsr

Thread Tools
 
Search this Thread
 
Old Mar 17, 2005 | 03:55 PM
  #1  
bounty359's Avatar
Thread Starter
 
Joined: Mar 2004
Posts: 75
Likes: 0
From: Orlando, FL
Default ctr pistons in a gsr

what do i have to do to get ctr pistons to fit in my gsr see sig for mods
Reply
Old Mar 17, 2005 | 06:59 PM
  #2  
T4eg's Avatar
Honda-Tech Member
 
Joined: Jul 2003
Posts: 2,784
Likes: 1
From: VA
Default Re: ctr pistons in a gsr (bounty359)

ctr pistons go directly onto gsr/itr rods. U have to mill LS rods for them to fit.

Chris
Reply
Old Mar 17, 2005 | 09:18 PM
  #3  
soLSvtec12kcraze's Avatar
 
Joined: Feb 2005
Posts: 401
Likes: 0
From: Ellsworth, ME
Default

mmmm.....domed-slug madness.....
Reply
Old Mar 18, 2005 | 05:10 AM
  #4  
bounty359's Avatar
Thread Starter
 
Joined: Mar 2004
Posts: 75
Likes: 0
From: Orlando, FL
Default Re: ctr pistons in a gsr (BlueHatch00)

thanks
Reply
Old Mar 18, 2005 | 09:40 PM
  #5  
soLSvtec12kcraze's Avatar
 
Joined: Feb 2005
Posts: 401
Likes: 0
From: Ellsworth, ME
Default

watch out how far you play with your cam gears, with a dome that high you could have marbles bouncing off the concrete....

Reply
Old Mar 18, 2005 | 09:57 PM
  #6  
mmuller's Avatar
Mad Scientist
 
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Default Re: (soLSvtec12kcraze)

before you decide to put PCT' on your car, read the first thread on the all motor forum.

Make your own conclusions
Reply
Old Mar 18, 2005 | 10:00 PM
  #7  
soLSvtec12kcraze's Avatar
 
Joined: Feb 2005
Posts: 401
Likes: 0
From: Ellsworth, ME
Default

p30s.....
Reply
Old Mar 19, 2005 | 05:54 AM
  #8  
bounty359's Avatar
Thread Starter
 
Joined: Mar 2004
Posts: 75
Likes: 0
From: Orlando, FL
Default Re: (soLSvtec12kcraze)

i have done some reasearch the p30 seemes to be the best for my setup which needs to be a daily driver. i dont have to modify my rods in any way do i ?
Reply
Old Mar 19, 2005 | 06:32 AM
  #9  
whiskaz's Avatar
Honda-Tech Member
 
Joined: Mar 2005
Posts: 319
Likes: 1
From: Arkansas/Kansas
Default Re: ctr pistons in a gsr (bounty359)

u gotta mill for b16 also like 1-2mm i think dont take my word on it
Reply
Old Mar 19, 2005 | 06:50 AM
  #10  
mmuller's Avatar
Mad Scientist
 
Joined: Nov 2002
Posts: 5,827
Likes: 1
From: tallafizzy, FL state
Default Re: (bounty359)

with p30's is plug and play; good choice
Reply
Old Mar 19, 2005 | 08:45 AM
  #11  
bounty359's Avatar
Thread Starter
 
Joined: Mar 2004
Posts: 75
Likes: 0
From: Orlando, FL
Default Re: (mmuller)

thanks
Reply
Old Mar 19, 2005 | 10:50 AM
  #12  
soLSvtec12kcraze's Avatar
 
Joined: Feb 2005
Posts: 401
Likes: 0
From: Ellsworth, ME
Default

I got some new custom age eagle rods and a set of p30s, but had to send them out to Rocket to have them machined on.....

but it put me right in the 12.5:1 area on ls/vtec, and they dont have the crazy domes like CTRs do....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jdmkidd23
All Motor / Naturally Aspirated
5
Apr 23, 2008 04:21 AM
CR-V-tech
All Motor / Naturally Aspirated
2
Nov 17, 2005 07:21 PM
Ivan
Tech / Misc
1
Apr 24, 2003 03:42 AM




All times are GMT -8. The time now is 10:04 AM.