So I have been reading all the pros/cons/rumors to this pulley, to which my brain is so tossed on weather to buy one and try it out. So my setup is a Ls/vtec, rotating assemble was balanced with the stock pulley 3 belt. Now will I have as much of a problem with this pulley with a balanced setup rather than an unbalanced setup? THe reason i am looking into the pulley is becuase the alternator pulley hits the engin bay which could be solved by a smaller belt but the crank pulley also hits the traction bar (EF CHASSIS) so i wanted to eliminate that. Sorry about the long post let me know what you think also any other good pulleys thanks guys

 

pm'd!

But for future people and references make your own decision

http://www.unorthodoxracing.com/faq_pulleys.html
http://www.unorthodoxracing.com/faq_flywheels.html


Clearly Honda and UR have no problems with this technology and understand the benefits

make your choice!


Modified by richard7968 at 6:35 PM 5/21/2007