I'm doing a timing belt/water pump on my mom's CR-V this weekend and had a few technical questions.

What is base timing? I'm assuming 16 +/-2 but wanted to be sure.

What are the valve adjustment specs? I figured I would do an adjustment while I'm in there.

What are the gaps on the spark plugs? I figured I would do these as well.

Thanks in advance - search engine was no help.

 

I think most of that stuff is printed on the emmissions sticker somewhere in the engine compartment?

 

Timing is 16 degrees BTDC +/- 2 degrees.
Valve clearance for intake is 0.08 - 0.12mm (0.003 - 0.006 inches); exhaust is 0.16 - 0.20mm (0.006 - 0.008 inches).
Spark plug gap is 1.0 - 1.1mm (0.039 - 0.043mm).

Have fun!