corrusion in my distributor cap
Thread Starter
Honda-Tech Member
Joined: Dec 2005
Posts: 3,548
Likes: 0
From: Panama, Panama
corrusion in my distributor cap
i have a 00 civic si.
i been having this problem for a while.
i have a msd cap, msd coil blaster, msd6a box.
there is corrusion by the cap teeths and makes my car hard to start.
it has a new rotor.
is been doing this way before i intalled the msd box and coil.
i dont know what is the problem....
i been having this problem for a while.
i have a msd cap, msd coil blaster, msd6a box.
there is corrusion by the cap teeths and makes my car hard to start.
it has a new rotor.
is been doing this way before i intalled the msd box and coil.
i dont know what is the problem....
Honda-Tech Member
Joined: Mar 2002
Posts: 1,355
Likes: 0
From: Oakland, Ca, USA
Re: corrusion in my distributor cap (Ruben19)
Have you tried scraping the corrosion off with a screwdriver? That should make it start up easier.
If that doesn't solve the problem, get a cap and rotor from a Honda dealership and accept no imitations.
Dan
If that doesn't solve the problem, get a cap and rotor from a Honda dealership and accept no imitations.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
93solcontender
Honda Civic / Del Sol (1992 - 2000)
4
Mar 9, 2003 02:33 AM