compression test
Thread Starter
Junior Member
Joined: Mar 2007
Posts: 87
Likes: 0
compression test
alright did the search but only came up in results...
when i did my compression test it would go up 270-275 across the board but it wouldnt stay like it would peak then drops down slowly. is this mean i got a leak some where or is this the way it works?
when i did my compression test it would go up 270-275 across the board but it wouldnt stay like it would peak then drops down slowly. is this mean i got a leak some where or is this the way it works?
Re: compression test (92vxjdm)
is this a compression test or leakdown?
The compression tester should hold the peak pressure obtained in a cylinder until you release it. If not then the gage is bad.
The compression tester should hold the peak pressure obtained in a cylinder until you release it. If not then the gage is bad.
Thread
Thread Starter
Forum
Replies
Last Post
