Comp cams for Dohc Vtec
Thread Starter
Joined: Sep 2002
Posts: 504
Likes: 0
From: Brooklyn, NY, USA
Comp cams for Dohc Vtec
Are these any good considering, The stage 1 cams feature 220 degrees of intake duration and 222 degrees of exhaust duration (@.50) will i have to change my T-body and intake mainfold for better flow any input would help its for a b16.. thank you
full info at
http://www.compcams.com/Techni...3.pdf
Modified by Lysawy at 9:06 PM 12/18/2003
full info at
http://www.compcams.com/Techni...3.pdf
Modified by Lysawy at 9:06 PM 12/18/2003
Senior Member
Joined: Oct 2003
Posts: 10,289
Likes: 1
From: Hendersonville, NC
Comparitively there aren't a lot of people using comp cams with there Honda motors. Also a lot more people would be able to help you if you could get the specs on the lift, and the duration in measurements other than .50.
Thread Starter
Joined: Sep 2002
Posts: 504
Likes: 0
From: Brooklyn, NY, USA
Re: (dc231)
Comp cams for b16,b18 vtec
duration
int. 260
exh. 266
Lobe lift vtec
int. .310"
exh .297"
valve lift (vtec)
int. .435"
exh .395"
centerline vtec
int. 100 degrees
exh. 106.5 degrees
duration
int. 260
exh. 266
Lobe lift vtec
int. .310"
exh .297"
valve lift (vtec)
int. .435"
exh .395"
centerline vtec
int. 100 degrees
exh. 106.5 degrees
Thread
Thread Starter
Forum
Replies
Last Post
