ok NM with my old question, I've ditched that idea. Ok, I was planning on gettin an exedy clutch kit for my turbo z6 rex with 88 si tranny. On http://www.clutchcityonline.com/ they have the kit for $255 for exedy organic kit. the part number is 08-802. Was kinda wondering about stiffness over stock, driveability, holding power and what not. Anyone info would be appreciated, thanks in advance.


Yager-



Modified by ImportHatch at 9:20 PM 9/21/2003

 

I'd replace the pressure plate, along with the throwout, & pilot bearings. It's too much work to get at to cheap out on a pressure plate. At least that's my view.

 

Not gonna work
Get an 89^ tranny u can use the 92^ clutches with more surface area for gripping
88 is 21 spine
89^ are 20 spline

 

Yeah i know the splines are diff. But on the site, they say you can use the 88 tranny with the 89-01 flywheel and it would work. So i WOULD have to use the 89-01 pp??


Yager-

 

ok guys, i gave up on taht idea. reread my post now.
thx

Yager-