Clutch Install........
Senior Member
Joined: May 2001
Posts: 10,753
Likes: 1
From: Where snow is, I am.
Re: Clutch Install........ (JDM B-Series)
only thing i suggest is hayne's or helm's manual from a 99-00 Si or Del Sol VTEC manual if you have a hybrid.
Not that complicated, just need to support the Engine with a cherry picker, and drop the tranny to the ground with some support, then change out the clutch and such, and make sure that the flywheel is still completely flat, and/or turn it or get a better flywheel.
Not that complicated, just need to support the Engine with a cherry picker, and drop the tranny to the ground with some support, then change out the clutch and such, and make sure that the flywheel is still completely flat, and/or turn it or get a better flywheel.
New User
Joined: Jul 2001
Posts: 550
Likes: 2
From: ny, usa
Re: Clutch Install........ (poison)
and make sure the clutch disc "slides" onto the tranny mainshaft splines easily when the trans is removed from the vehicle, its a bitch to find out you have tight splines while holding a tranny above yer head.. and also make sure to have the clutch disc aligned properly during installation, I personally use my finger, but a 12mm chrome Craftsmen deep well socket works wonders..
Thread
Thread Starter
Forum
Replies
Last Post
