Are ckf sensor interchangable between d series and b series?

 

I believe B-series are 3-wire, and that d-series are 2-wire

Anyone confirm??

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20izzle &raquo;</TD></TR><TR><TD CLASS="quote">Are ckf sensor interchangable between d series and b series?</TD></TR></TABLE>

dammit i have this code on a b16a2 in a 99 EX...where is it located?

 

i think above the oil filter

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20izzle &raquo;</TD></TR><TR><TD CLASS="quote">i think above the oil filter
</TD></TR></TABLE>thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b20izzle &raquo;</TD></TR><TR><TD CLASS="quote">i think above the oil filter
</TD></TR></TABLE>

umm...CFK=Crank Fluctuation Sensor

Why would it be by the oil fiklter?? Unless you mean the plug, thats by the oil filter.

CFK sensor itself is behind your crank accessory drive pulley. It senses speed variations from the crank gear that drives your timing belt.

 

whoops didnt pay attention...i was talkin about the oil sensor....

 

You'll see three wires that look like they come out of the oil pan right next to your crankshaft pully, that'll be your ckf sensor. Get that 400 ft/lb impact gun ready if your looking to change it! I believe the d and b motors are three wire. A green, white and black I believe on both.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by category5 &raquo;</TD></TR><TR><TD CLASS="quote">I believe the d and b motors are three wire. </TD></TR></TABLE>

D is 2 wire
B is 3 wire

 

so where do i add the wire on the dx harness?

 

There is a picture on H-T around here somewhere explaining it. I do not personally know