CIVIC 2000 hub removal!!! HELP

Reply Subscribe

Thread Tools

Search this Thread

Jun 16, 2004 | 05:11 PM

lDanny

Thread Starter

Honda-Tech Member

Joined: Nov 2003

Posts: 3,175

Likes: 0

CIVIC 2000 hub removal!!! HELP

I cant seem to pull the hub off.. i got the axle nut off but i cant get the hub off .. any ideas? I need to replace a broke stud!!

Jun 16, 2004 | 06:27 PM

beaterdriver

Honda-Tech Member

Joined: Mar 2004

Posts: 554

Likes: 0

From: Durham, NC, USA

if you want to take the whole entire assembly off you have to remove the lower ball joint, upper ball joint bolts and i think the tie rod bolt. but the bearing has to be pressed out

Jun 17, 2004 | 02:06 AM

lDanny

Thread Starter

Honda-Tech Member

Joined: Nov 2003

Posts: 3,175

Likes: 0

Re: (beaterdriver)

i just need to get the studs/ hub out..

Jun 17, 2004 | 11:12 AM

ykracing

Honda-Tech Member

Joined: Nov 2002

Posts: 1,280

Likes: 0

From: Motown

Re: (DuMa)

well the hub needs to be pressed out of the bearing. and it will likely trash the bearing at the same time, so you might as well get a new bearing before you get started.