changing the rev limiter

Reply Subscribe

Thread Tools

Search this Thread

Jul 28, 2003 | 12:41 AM

xxh23fuzionxx

Thread Starter

Junior Member

Joined: Sep 2002

Posts: 44

Likes: 0

From: Falls Church, Va, 22046

changing the rev limiter

IS there anyway you can set the rev limiter on the car. I have a OBD1 P28 ecu runnin on a B18C hatch... I wanna set my REV on a certain scale. Is it possible to do so? any ideas?

Jul 28, 2003 | 02:58 AM

b19coupe

Honda-Tech Member

Joined: Mar 2002

Posts: 9,854

Likes: 4

From: Southern California, U.S.A.

Re: changing the rev limiter (xxh23fuzionxx)

Chip it. The VTEC engagement point and fuel cut can be set any where you want.

Jul 28, 2003 | 11:04 PM

xxh23fuzionxx

Thread Starter

Junior Member

Joined: Sep 2002

Posts: 44

Likes: 0

From: Falls Church, Va, 22046

Re: changing the rev limiter (b19coupe)

how do i set it then?

Jul 29, 2003 | 07:04 AM

b19coupe

Honda-Tech Member

Joined: Mar 2002

Posts: 9,854

Likes: 4

From: Southern California, U.S.A.

Re: changing the rev limiter (xxh23fuzionxx)

The chip determines fuel cut and VTEC. Talk to Kenji or Katman about getting your ECU chipped.

Jul 29, 2003 | 03:45 PM

.xcalibur.

Junior Member

Joined: Jul 2003

Posts: 898

Likes: 1

From: So, Cal

Re: changing the rev limiter (b19coupe)

You can change redline on your ecu by getting it chipped. The only thing is that its permanent. Once the eeprom has been programmed, it cannot be changed. Im not exactly sure but i think there is an apex-i device that can change it. By the way, dont change redline unless you know your car can handle that rpm speed and you know you make power up there as well.