alright guys lastnight i pulled my motor and painted the engine bay.Then i put the motor back in the and connected the wiring the same way it was, went to start it but nothing? When i go to start it, its all normal, you can hear the fuel pump and stuff , just when you turn it to start it the fuel bump stays on and nothin else happens

I have checked the grounds there on bare metal.
I checked the big relay under the dash in the fuse box
I checked all the fuses
Taped the started with a hammer and checked its ground
I also coasted it down a hill to catch it in gear still nothin

I am pretty lost at this point please help!