the cylinder thingy, it came off a 97 gsr head i was putting together the head and this was laying around. thanks

 

It looks like a dowel pin. If that is a valve cover nut next to it, it's probably one of the small dowels on the cam caps or the bridges above. Take the caps off and find out which one is missing.

 

valve cover nut and vtec rocker piston

is the little dowel looking thing hollow in the middle?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by acy76 &raquo;</TD></TR><TR><TD CLASS="quote">It looks like a dowel pin. If that is a valve cover nut next to it, it's probably one of the small dowels on the cam caps or the bridges above. Take the caps off and find out which one is missing.</TD></TR></TABLE>

it would be the one under #3 cam cap.


or bepending on size it could be the one that lines the head up?

 

I can't see how thick the dowel is... might be one of the ones in the plastic timing belt cover, got mixed in with your head stuff.

 

WOW thanks for all the replies...yes it is hollow but it is not that big it is fairly small not as big as the dowl pin to align the head. i am a noob at all this and appreciate all this help!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mmuller &raquo;</TD></TR><TR><TD CLASS="quote">valve cover nut and vtec rocker piston

is the little dowel looking thing hollow in the middle?</TD></TR></TABLE>

Yeah...

 

yeah it goes under the no 3 cam holder! once you take it off, you can miss where it goes!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mattssi &raquo;</TD></TR><TR><TD CLASS="quote">yeah it goes under the no 3 cam holder! once you take it off, you can miss where it goes! </TD></TR></TABLE>
does it go here?

 

Yeah there should be that and an O ring that fits around it I believe.

 

THANK YOU EVERYONE FOR HELPING ME OUT!!!! TO H-T..i will post pictures up of my b20vtec wen im done!!