Tech / Misc Tech topics that don't seem to go elsewhere.
Sponsored by:
Sponsored by:

can i use this turbo?

Thread Tools
 
Search this Thread
 
Old Oct 17, 2001 | 04:01 PM
  #1  
gonnadieyoung's Avatar
Thread Starter
New User
 
Joined: Oct 2001
Posts: 6
Likes: 0
From: thousand oaks, ca, usa
Default can i use this turbo?

my friend was cleaning his garage out and discovered an turbo in a box of parts.it came off a svo mustang 4cyl.he is willing to give it to me for free.i've got a 94 accord f22a.will it work on my ride.its a garret t-03 and was run at 8lbs from the factory.what all will i need to buy?is it worth it?or are their other kits out there that will work out easier and better?please give me any advice you can thanks
Reply
Old Oct 18, 2001 | 06:10 AM
  #2  
Spade's Avatar
Honda-Tech Member
 
Joined: Aug 2001
Posts: 15,369
Likes: 3
From: Redwood City, Ca
Default Re: can i use this turbo? (gonnadieyoung)

I really can't tell ya but, I can offer some advise, post this in the Forced Induction section and they will answer.
Reply
Old Oct 18, 2001 | 06:17 AM
  #3  
VTC_CiViC's Avatar
Honda-Tech Member
 
Joined: Aug 2001
Posts: 8,613
Likes: 1
From: Naples, Fl, USA
Default Re: can i use this turbo? (gonnadieyoung)

It'll probably require a custom maniold, but in short, if the turbo is in good shape, I can't think of any reason why you couldn't use it.
Reply
Old Oct 18, 2001 | 06:19 AM
  #4  
MiraiZ's Avatar
Honda-Tech Member
 
Joined: Oct 2000
Posts: 7,810
Likes: 0
From: Yokohama, Japan, Japan
Default Re: can i use this turbo? (Spade)

get it rebuit dude....no tellin what shape its in
Reply
Old Oct 18, 2001 | 06:21 AM
  #5  
Spade's Avatar
Honda-Tech Member
 
Joined: Aug 2001
Posts: 15,369
Likes: 3
From: Redwood City, Ca
Default Re: can i use this turbo? (VTC_CiViC)

How easy does it spin?

If you do use it I would get fuel pump/regulator. Like VTC_CIVIC said custom manifold (exhaust), custom piping....I don't know where the cost will be on this but, hmmm, the most expensive thing is always the turbo however you will need alot of custom work to get this to fit unless someone has already done it and they can tell you what they did and used.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
97Alex
Welding / Fabrication
4
Dec 24, 2007 11:30 PM
V6StreetHonda
Forced Induction
77
Nov 22, 2005 10:56 AM
^jefs0ng
Forced Induction
1
Nov 19, 2003 12:52 AM
DroppedIntegra
Forced Induction
1
Jun 20, 2002 11:17 AM




All times are GMT -8. The time now is 09:03 AM.