Cam Tuning noob question

Reply Subscribe

Thread Tools

Search this Thread

Jul 20, 2005 | 03:55 AM

Takumi Fujiwara

Thread Starter

Honda-Tech Member

Joined: Mar 2003

Posts: 2,091

Likes: 0

From: Little Tokyo, CA, USA

Cam Tuning noob question

After you change the settings on the cams... are you supposed to re-set/do the timing?

Jul 20, 2005 | 08:26 AM

Outsane

Honda-Tech Member

Joined: Jan 2003

Posts: 3,200

Likes: 0

From: San Diego, CA, USA

Re: Cam Tuning noob question (Takumi Fujiwara)

if your messing with the cams you should be on a dyno

Jul 20, 2005 | 08:27 AM

IN VTEC

Honda-Tech Member

iTrader: (3)

Joined: Jan 2000

Posts: 10,180

Likes: 3

From: Bloomington, IN, USA

Re: Cam Tuning noob question (Takumi Fujiwara)

Only if you move:

intake cam (B-series)
exhaust cam (H-series)

It depends on which cam drives the distributor, where the crank angle sensor is located.

Jul 20, 2005 | 10:26 PM

Takumi Fujiwara

Thread Starter

Honda-Tech Member

Joined: Mar 2003

Posts: 2,091

Likes: 0

From: Little Tokyo, CA, USA

Re: Cam Tuning noob question (IN VTEC)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IN VTEC »</TD></TR><TR><TD CLASS="quote">Only if you move:

intake cam (B-series)
exhaust cam (H-series)

It depends on which cam drives the distributor, where the crank angle sensor is located.</TD></TR></TABLE>

Makes sense. Thanks.