cam/crankshaft
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 15
Likes: 0
From: newport, ri, newport
cam/crankshaft
what kind of cam and crank shafts should be used for a b16a1 motor.
also is nitrous a good decision and if i do use it should it be wet or dry. what is the difference
also is nitrous a good decision and if i do use it should it be wet or dry. what is the difference
Honda-Tech Member
Joined: Sep 2002
Posts: 912
Likes: 1
From: Central Point, Oregon, United States
Re: cam/crankshaft (rexfiend1877)
What do you mean by 'what kind'? Are you looking for aftermarket manufacturers? Or do you have a bare block that you're trying to find stock crank/cam for?
As for nitrous, there is tons of stuff on that here on HT and on the net in general. Search man, but dry kits only inject nitrous and use your cars fuel injection system to add the fuel (no recommended) and the wet kits inject fuel and nitrous (much better, safer, and tunable). Now go search
Lates, Davey
As for nitrous, there is tons of stuff on that here on HT and on the net in general. Search man, but dry kits only inject nitrous and use your cars fuel injection system to add the fuel (no recommended) and the wet kits inject fuel and nitrous (much better, safer, and tunable). Now go search
Lates, Davey
Thread
Thread Starter
Forum
Replies
Last Post
silverboost
Honda Civic / Del Sol (1992 - 2000)
3
Oct 16, 2006 11:45 AM