i was working on a freinda car and he went to a dealer to get his brakes done and them ******** prob used a impact on the small 10-12mm bolts that are on the caliper so its completly rounded, i need help taking it out now anyone know a way to take it out

 

If the dealership just recently did the brake work on it, why wouldn't your friend bring the car back to the shop to have them fix it at no charge?

 

a torch and some vise grips.
or an air hammer, good luck.

 

i would take it back to the dealership and tell em to fix it

 

slot that bitch or try and "reshape" it down to the next smallest size that will work

 

the car was with another freind who went to the dealer years back and said he was gonna chge the pads but he too just left them, so im prob gonna grind it to like a 6 mm or just vice grip the **** out of it which i already did, or cut a slot in in and use a flathead to lossen it, wtf though my dad lost my expletivein makes me so mad, he lost my attachment for my rotozip so i can actually do anything, ill prob end up cuting the bolt off cuz the caliper will slide right out anywaays ha, i hate the expletivein dealership ********

 

hey bro, craftsman sells a stripped/bolt out socket set. Just go to sears and ask them about the 5pc easyout socket set, should run you about $25 bucks. the best investment i made in about 2 years. works on everything, just use a larger socket over thier set and bolt should come out like normal!

 

X2 on the easy out i got a set and they have never not worked on any bolt

 

what kind of set was it. My craftsman set hasnt let me down once! Plus what were you using them on....Head Bolts?!

 

Craftsman bolt out.. they sell several sets some as low as 19.99
http://www.sears.com/shc/s/p_1...t+out

They do sell bigger sets but they cost more of course.

 

thanx bro. i knew somebody had to have heard of these!

 

i got an irwin one at a local autozone


works miracles!!!!