Hi, this summer I'll have 2 blocks to work with (H22 and F23). I would like to know how to work the right way. I will also have access to some gooooooood cnc equipment . So I'll buy the material and do some research on the sleeve material, design, coating,... But first I need to know:

Are the sleeves press fit or welded to the block? How to remove or install them? What are the tools I'll need?...

Tnx for any inputs!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JSMC &raquo;</TD></TR><TR><TD CLASS="quote">Hi, this summer I'll have 2 blocks to work with (H22 and F23). I would like to know how to work the right way. I will also have access to some gooooooood cnc equipment . So I'll buy the material and do some research on the sleeve material, design, coating,... But first I need to know:

Are the sleeves press fit or welded to the block? How to remove or install them? What are the tools I'll need?...

Tnx for any inputs!</TD></TR></TABLE>

Well, I've never resleeved a block. But from what I have seen, the sleeves are pressed into the block. And the old ones are simply bored out of the block rather than removed.

 

http://www.dartonsleeves.com/mainpage.htm

Darton has their manuals online.
Glenn