b20b toughts
Thread Starter
Honda-Tech Member
Joined: Feb 2003
Posts: 2,271
Likes: 3
From: Quebec, Canada
b20b toughts
W/ b18b Intake manifold and a header, 2.25/2.5 exhaust, how much could we expect to produce on a dyno ? a clean 130 whp ? even with 8.8:1 ?
How much of a gain from a b18b to this ? for a road race car.
How much of a gain from a b18b to this ? for a road race car.
Honda-Tech Member
Joined: Sep 2002
Posts: 6,022
Likes: 0
From: tha East Coast
Re: b20b toughts (STN_Pat)
I dyno'd 149.8 whp and 145ftlbs with my B20b
B18b cams
B18b Intake manifold + TB
B18b ECU
GSR tranny
4-1 header
AEM cai
2.25 test pipe
2.25 exhaust
Dizzy timing full advanced
110 octane race gas (was in there for the nitrous)
B18b cams
B18b Intake manifold + TB
B18b ECU
GSR tranny
4-1 header
AEM cai
2.25 test pipe
2.25 exhaust
Dizzy timing full advanced
110 octane race gas (was in there for the nitrous)
Joined: Sep 2004
Posts: 72
Likes: 0
From: visalia, ca, U.S.A
Re: b20b toughts (JDM S1eeper)
check out my 2 liter set up on my web page http://www.cardomain.com/memberpage/672307
Honda-Tech Member
Joined: May 2004
Posts: 100
Likes: 0
From: TX
Re: b20b toughts (JDM S1eeper)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM S1eeper »</TD></TR><TR><TD CLASS="quote">I dyno'd 149.8 whp and 145ftlbs with my B20b</TD></TR></TABLE>
Was that on the bottle?
Modified by Octoman at 2:06 PM 9/24/2004
Was that on the bottle?
Modified by Octoman at 2:06 PM 9/24/2004
Trending Topics
Member
Joined: Jun 2003
Posts: 1,791
Likes: 0
From: Damn EA6Bs, Washington
Re: b20b toughts (STN_Pat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat »</TD></TR><TR><TD CLASS="quote">150 whp for a stock untuned b20b rated at 126 from factory with stock em/im from a crv.
40+ whp only from IHE ?
</TD></TR></TABLE>
he also is running the b18b m/t cams which have been dyno'd for a 7whp gain. the engine he is running also is what i guess u could call a "lucky" motor. very very strong.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat »</TD></TR><TR><TD CLASS="quote">Would the gain be noticable from a b18b ? I need a bit more torque for the track.</TD></TR></TABLE>
yes u would notice the difference. in my hatch i was turning 15.0-14.9 all motor. he is turning 14.4 all motor. thats a very good difference.
40+ whp only from IHE ?
</TD></TR></TABLE>he also is running the b18b m/t cams which have been dyno'd for a 7whp gain. the engine he is running also is what i guess u could call a "lucky" motor. very very strong.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STN_Pat »</TD></TR><TR><TD CLASS="quote">Would the gain be noticable from a b18b ? I need a bit more torque for the track.</TD></TR></TABLE>
yes u would notice the difference. in my hatch i was turning 15.0-14.9 all motor. he is turning 14.4 all motor. thats a very good difference.
Thread
Thread Starter
Forum
Replies
Last Post
