I did a search but could not find exactly what i needed... please help...

Ok i got a 1999 Honda Civic EK, with D16 pulled and will be replaced with a 1998 CR-V B20b engine which is Jackson Racing Supercharged, and has DSM 450 injectors with resister box.

I need help with the wiring... I understand that the car and engine are both OBD2, but i only have an OBD1 LS ECU to run the engine (Hondata)... And i don't really want to pull the civic wiring out if i can avoid it.

Do i only need the OBD1 - OBD2 conversion wiring? or more?
What do i need to do to make this baby run???

And one last thing... what motor mount do i need to replace?

 

cummon... someone must know? please help... its my daily driver. need it.

 

You only need the OBD1-OBD2 wiring

 

Really??? thats great... thanks

 

you don't need obd1 to obd2 wiring. what you need is an obd2b to obd1 ecu jumper harness as well as the t bracket and the drivers side mount bracket from a 99-2000 civic si.

 

thanks man... i will get right on it...

 

Ok tried to do a search. Maybe someone can help. Putting a '95 CRV B20 in a '93 civic coupe ex. What ECU to use? Will a LS ECU work? Do the pins match from the CRV to the EX? In otherwords, I believe the connectors are the same for the wiring harness, but do the wires match on the two cars?

 

obd1 ecu