b18c1 block weight (measured)
Thread Starter
Honda-Tech Member
Joined: Dec 2004
Posts: 398
Likes: 0
From: California/New Zealand, USA
b18c1 block weight (measured)
In case anyone needs this for shipping, etc.:
b18c1 block completely bare without anything on it except stock sleeves intact:
53 lb.
This is for just the aluminum casting and OEM cylinder sleeves. Main caps, 2/3/4 girdle, sensors, oil cooler, oil pump, crank, etc. removed.
keywords: block weight b18c1 b18c5 b18 b16a b16
Modified by clayne at 9:35 PM 1/21/2005
Modified by clayne at 9:35 PM 1/21/2005
Modified by clayne at 9:36 PM 1/21/2005
Modified by clayne at 9:36 PM 1/21/2005
b18c1 block completely bare without anything on it except stock sleeves intact:
53 lb.
This is for just the aluminum casting and OEM cylinder sleeves. Main caps, 2/3/4 girdle, sensors, oil cooler, oil pump, crank, etc. removed.
keywords: block weight b18c1 b18c5 b18 b16a b16
Modified by clayne at 9:35 PM 1/21/2005
Modified by clayne at 9:35 PM 1/21/2005
Modified by clayne at 9:36 PM 1/21/2005
Modified by clayne at 9:36 PM 1/21/2005
Thread
Thread Starter
Forum
Replies
Last Post
khang77642
Classifieds: Forced Induction
5
Jul 24, 2003 03:17 PM
