I have someone wanting to sell me B20 cams. Is there any difference from the stock LS cams? I was told it will give me alittle bit better top end. I dont want to waste money on them if they are the same.

 

Get a set of crowers instead..

 

b20b's power is in the lower rpm range that wouldnt make any sense for them to give your high revving b18c1 anymore topend
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LSVTEC 91 Civic &raquo;</TD></TR><TR><TD CLASS="quote">Get a set of crowers instead.. </TD></TR></TABLE>

i second that...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by opkjoblacsh &raquo;</TD></TR><TR><TD CLASS="quote">b20b's power is in the lower rpm range that wouldnt make any sense for them to give your high revving b18c1 anymore topend

</TD></TR></TABLE>

Guess you didnt read the title. I have a LS motor in the car.

 

The B18B cams have slightly more duration.

The B20 cams would lower top end.

 

so I would end up doing more harm then good?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goodfella732 &raquo;</TD></TR><TR><TD CLASS="quote">so I would end up doing more harm then good?</TD></TR></TABLE>

Not necessarily. Your Powerband just may be lower than w/ the LS cams. IMO, I would rahter have the powerband be a little higher because even w/ my LS tranny I pass the traps @ 7100 in 4th.