http://s835.photobucket.com/user/cra...a45/media/IMG_20130401_171321_955.jpg.html http://s835.photobucket.com/user/cracka45/media/IMG_20130404_213044_569-1.jpg.html




Okay I just got my head back from the shop about a week ago had them hot tank it, 3 angle valve job, port and polish, and had my Brian Crower valve guides installed. And i just put on my viton intake and exhaust valve seals on about ten minutes ago I have Brian Crower valves I just need springs, retainers, cams, valve locks, and possibly a diffrent/stronger rocker arm? The guy at the shop was telling me I should replace the rocker arms just for piece of mind. But I haven't really found any rocker arms for my b18a1 head. On another thread it was said crane makes rocker arms. Which model of their rocker arms would fit my head? Who else makes rocker arms for the b18 head? I've searched quite a bit but I haven't found much on this topic. Going to be running 400hp in a boosted b18a1.

 

http://s835.photobucket.com/user/cra...1_669.jpg.html

 

http://s835.photobucket.com/user/cra...1_955.jpg.html


Sorry the links at the top didn't work. These do though

 

http://s835.photobucket.com/user/cra...569-2.jpg.html

 

you're not gonna find anything but oem rocker arms. maybe some Chinese aftermarket replacement.

you don't need anything other than oem.

 

I've read that the OEM ones tend to wear down a lot faster with aggressive cams. I'm leaning towards the Brian Crower forced induction cams. But I'm open to others opinions.