B16a Engine Noise Problem
12-22-2007, 03:38 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: WI or Mid-West
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
B16a Engine Noise Problem
Alright HT,
Haven't got the time to take my car out to my mechanic to check why my motor is making this noise. I'll explain, the noise comes in when I get passed 5000 rpm and car feels very weak compared to when I had it a few months ago. Sound is kind of a fast high rattling noise kind of like the exhaust rattling, but from the head. Could it be my valves?
I ran a dumb 16.00 flat all day with this when I took it to the tracks. In this car, which is a DD, I have an 92 EG with a b16a block with a gsr head and tranny (gsr block spun a bearing so I replaced it with what I had laying around). Anyways all stock except the Edelbrock IM. I 'm thinking about getting rid of the car. I mean it's still good, but I do have a b20 vtec turbo project I'm trying to finish. Oh well.
Let me know what you guys think that noise is. Thanks in advance so I can be faster.
Haven't got the time to take my car out to my mechanic to check why my motor is making this noise. I'll explain, the noise comes in when I get passed 5000 rpm and car feels very weak compared to when I had it a few months ago. Sound is kind of a fast high rattling noise kind of like the exhaust rattling, but from the head. Could it be my valves?
I ran a dumb 16.00 flat all day with this when I took it to the tracks. In this car, which is a DD, I have an 92 EG with a b16a block with a gsr head and tranny (gsr block spun a bearing so I replaced it with what I had laying around). Anyways all stock except the Edelbrock IM. I 'm thinking about getting rid of the car. I mean it's still good, but I do have a b20 vtec turbo project I'm trying to finish. Oh well.
Let me know what you guys think that noise is. Thanks in advance so I can be faster.
12-23-2007, 02:12 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: WI or Mid-West
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: (zccr-xsi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zccr-xsi »</TD></TR><TR><TD CLASS="quote">screw that b16 finish the b20 and put that in the eg.just sell the b16 as a swap and use that money for the b20</TD></TR></TABLE>
True that!!! I'm actually trying to find an EK Hatch to put it in, but I thinking about selling it to fund my 500+++ hp project.
True that!!! I'm actually trying to find an EK Hatch to put it in, but I thinking about selling it to fund my 500+++ hp project.
12-23-2007, 02:17 PM
#6
Honda-Tech Member
Thread Starter
Join Date: Oct 2007
Location: WI or Mid-West
Posts: 143
Likes: 0
Received 0 Likes
on
0 Posts
Re: (89s1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 89s1 »</TD></TR><TR><TD CLASS="quote">vtec not engaging and LMA's making noise?</TD></TR></TABLE>
Oh vtec does engage, but I lose top end power and when I rev past 5k it starts to buzz/rattle. I don't know about the LMA's, but will probably have that checked as well as the whole head.
LET ME KNOW WHAT YOU GUYS KNOW. THANKS.
Oh vtec does engage, but I lose top end power and when I rev past 5k it starts to buzz/rattle. I don't know about the LMA's, but will probably have that checked as well as the whole head.
LET ME KNOW WHAT YOU GUYS KNOW. THANKS.
01-13-2008, 07:23 PM
#7
Honda-Tech Member
Join Date: May 2007
Location: Bedford, IN., usa
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
Re: (VeeL_B20)
sounds like it could be a broken V-sping with Vtec would still ingauge just wouldn't kick hard like it should, and giving u the rattle/ buzz u hear. good luck with ur prob bro. 
Thread
Thread Starter
Forum
Replies
Last Post
