MODS PLEASE MOVE TO DIFFERENT CATAGORY IF NEEDED

ok, so i wanna get a B16A Gen1 Complete Swap w/LSD, but first, let me tell you where im at. i have a 91 acura integra LS, AUTO with 151,000 miles on it. burns oil, ticks, and is pretty much a beater motor now. i want to do a B16A Gen1 Complete Swap w/LSD FULL swap, which includes:

LSD
Cable transmission
Complete Swap
Includes motor, tranny, clutch/flywheel, axles, ecu, shift linkage, all attached components, starter, alternator, sensor, t.body, JDM wire loom, and distributor

*This means im doing the auto/manual conversion also*

what else will i need to buy so i can install this all together, with all the stuff?

on a side note, what do you think is more benefical, the B16A Gen1 Complete Swap w/LSD or the B16A Gen1 OBD1 (XSi) Complete Swap w/o LSD?

also, what are your thoughs on the b16 motors?

TIA

Rob

 

Hey, I have an OBD1 B16a in my 93 Da, without the LSD, and i think that works good for me, I think your better off buying the obd1 because its newer. it may cost a bit more, but keep looking around.

 

actually, i think now im just gonna buy the head and pistons from the guy and start on a LS/Vtec.

 

B16 is nicer in a lighter car. The DA needs torque, which is not available in a B16 without a turbo.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Robstunner22 &raquo;</TD></TR><TR><TD CLASS="quote">actually, i think now im just gonna buy the head and pistons from the guy and start on a LS/Vtec.</TD></TR></TABLE>