well in my previouse post you would see that i broke both axles and now the axle nut seized up i usually cut them in half but thats when i had my dads tool is there any other way i get this thing off



do you have suggestions with getting it off i used a impact snap on gun with a 60 gallon ac... no heat i have no torch. i used pb blaster wd40

 

anybody

 

Breaker bar with a 6' pipe and some friends with they are around.

 

i will do

 

breaker bar makes takeing it off cake trsut me it took me 3 days till i bought the bar .. its the best tool in my garage right now!

 

im in the same situation as this person except i have used breaker bars and have broken about 4 half inch breaker bars hooked up to 6 foot pipes....and yes ive sprayed down the nut and undid the dimple....my cars been sitting there for almost a month now all broken....im afraid to go buy a 3/4 inch breaker bar because i feel like itll break...what do people suggest, remember theres no way of me getting to an impact wrench and torch

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda Crx &raquo;</TD></TR><TR><TD CLASS="quote">


do you have suggestions with getting it off i used a impact snap on gun with a 60 gallon ac... no heat i have no torch. i used pb blaster wd40 </TD></TR></TABLE>


You need more pressure in the tank.

I usually crank it up to 140+ PSI

You also will need a real impact socket not a chrome one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kinkyintegra &raquo;</TD></TR><TR><TD CLASS="quote">im afraid to go buy a 3/4 inch breaker bar because i feel like itll break...what do people suggest, remember theres no way of me getting to an impact wrench and torch</TD></TR></TABLE>

Go to Walmart or any hardware store and pic up one of(or similar to) these bitches.

 

I've ran into this problem at the junkyard. 2 breaker bars, an extension (which should never have been there), a ratchet (which i learned my lesson never to use that again)

And one bent breaker bar.


What kind of breaker bars are you guys using that will hold up to this?

Oh and I used PB buster.

To help you out I just ended up taking the axle with me and took a impact wrench to it.

I've yet to come across a bolt my impact won't pull of

 

1/2" craftsman breaker

 

you can also use a "nut splitter". We bought one at Sears for my buddies EF axle nut after it broke two 6' breaker bars.

 

try using the handle for your jack if it's beefy enough, and then connect it to a 1/2 ratchet/breaker bar whatever you have. some people don't use ratchets but that's how I always do it lifetime warranty on ratchet.