I had bought the head bolts for the D16y8 head I am puting onto my D15b7 block. they are about an inch too short. They were only 3 bucks each so no big loss. but the old stock D15b7 bolts fit perfect! Well back to the dealership where the D15b7 head bolts cost $9 bucks each
Summit sells ARP head stud kit for "honda D16 series, 10mm" for $90 bucks.
Will these fit my block or will these be an inch short on the threaded end as well?
the part no. is ARP-208-4301.
Thanks!