Anyone have problems with a aem 320. Buzzing
#1
Honda-Tech Member
Thread Starter
iTrader: (13)
Join Date: May 2012
Location: Paratrooper HQ
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have problems with a aem 320. Buzzing
I am running a dual hanger with twin aem 320 pumps.
I have had a lot of trouble with the lines from pump to hanger one blew off then the same day one split.
Now occasionally there is an very loud buzzing/ groaning sounds comming from my dual hanger. I thought it may be a pinched line. But in about 99/ sure my lines are good tomgo seeing I'm installing it 7 times. Mostly
Happens at ideal for 5-10 seconds then goes away it is very loud
Has any one had similar problems with the aem 320.
I have had a lot of trouble with the lines from pump to hanger one blew off then the same day one split.
Now occasionally there is an very loud buzzing/ groaning sounds comming from my dual hanger. I thought it may be a pinched line. But in about 99/ sure my lines are good tomgo seeing I'm installing it 7 times. Mostly
Happens at ideal for 5-10 seconds then goes away it is very loud
Has any one had similar problems with the aem 320.
Last edited by $MIKE$; 04-12-2014 at 09:19 AM.
#2
Honda-Tech Member
Thread Starter
iTrader: (13)
Join Date: May 2012
Location: Paratrooper HQ
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone have problems with a aem 320. Buzzing
Messing with it today I find that one of the pumps is a lot louder than the other with normal operation and ideal.
Any ideas I wanted to get some perspective before I take it out and order a new pump
Update.
It was a kink causing the vibration problems
I suggest using steel braided -6 an hose for this as it is resistance to kinking.
It is a "harder" hose so when you attach the second leg it will be more difficult if you can imagine that lol.
Any ideas I wanted to get some perspective before I take it out and order a new pump
Update.
It was a kink causing the vibration problems
I suggest using steel braided -6 an hose for this as it is resistance to kinking.
It is a "harder" hose so when you attach the second leg it will be more difficult if you can imagine that lol.
Last edited by $MIKE$; 04-12-2014 at 03:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
krings
Acura RSX DC5 & Honda Civic EP3
21
01-02-2003 04:09 PM