ok, i basically wanted to know some specs on the various programs that people use for chipping p28 ecu's. such as fuel curve, vtec, redline, rev limiter, etc. if you have a chipped p28, what are the specs of yours and if you chip p28's, what are the specs of each program that you have, ie skunk2, mugen, jun, etc. thanks.

 

http://www2.pgmfi.org/index2.html

 

Custom or nothing.
All the aftermarket chips suck.
-PHiZ

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PHiZ &raquo;</TD></TR><TR><TD CLASS="quote">Custom or nothing.
All the aftermarket chips suck.
-PHiZ</TD></TR></TABLE>

 

i'm running skunk2... runs a little rich, but other than that, no problems... should be able to fix w/ vtec controller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bogus &raquo;</TD></TR><TR><TD CLASS="quote">i'm running skunk2... runs a little rich, but other than that, no problems... should be able to fix w/ vtec controller</TD></TR></TABLE>

I really think this is what the aftermarket chips had in mind, they all run rich, and then you can lean them out.

Either that or each succesive person that gets the chip richens it up, cause they don't want to have customers blowing cars, and don't have the ability to comprehend if the chip is already rich...

-PHiZ

But I'd spend whatever money it takes to get someone talented to write the chip the first time, and save the 200-300 bucks on the AFC...

 

so ur saying HONDATA sucks?


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PHiZ &raquo;</TD></TR><TR><TD CLASS="quote">Custom or nothing.
All the aftermarket chips suck.
-PHiZ</TD></TR></TABLE>

 

Hondata isn't just a chip. The tuner has to CUSTOMIZE the parameters of the program.

 

wow.
-PHiZ

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18crx &raquo;</TD></TR><TR><TD CLASS="quote">so ur saying HONDATA sucks?


</TD></TR></TABLE>

ill sell you a hondata chip if you want


is like taking candy from a baby..... LOL


best info for chips

http://www.hyperducktuning.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18crx &raquo;</TD></TR><TR><TD CLASS="quote">so ur saying HONDATA sucks?


</TD></TR></TABLE>

Mannn

 

I think this is kinda what your asking:

These are the specs on the programs I carry:

skunk2: 4800-9000
mugen: 5700-900
jun: 4400-9100
rpt: 4800-9500
visions: 5200-9600
feels: 5700-9600
custom mild all motor: 5700-8200
Custom all motor: 5300-9200

hope that helps...

thanks
jason