alignment specs
Thread Starter
New User
Joined: May 2001
Posts: 298
Likes: 0
From: Laramie, Wyoming, USA
alignment specs
What would be the cause of caster being off in the front (it is at .15 degrees on one side and -.54 
on the other)? Also, would a badly deteriorated trailing arm bushing cause a wheel to have both posotive camber and be off spec for toe (actual camber is .16 degrees and toe is at -.36") or would there be more to this equation? I plan on getting new springs/shocks soon and I also want to get urethane bushings and get my alignment to spec. Any help is GREATLY appreciated, thanks in advance. 
on the other)? Also, would a badly deteriorated trailing arm bushing cause a wheel to have both posotive camber and be off spec for toe (actual camber is .16 degrees and toe is at -.36") or would there be more to this equation? I plan on getting new springs/shocks soon and I also want to get urethane bushings and get my alignment to spec. Any help is GREATLY appreciated, thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
virginia_dude
Honda CRX / EF Civic (1988 - 1991)
4
Feb 25, 2004 08:54 AM