AEBS Head Stud Question
Thread Starter
Joined: Nov 2003
Posts: 1,993
Likes: 0
From: Ft. Lauderdale, FL/ Passaic, NJ
AEBS Head Stud Question
I have a set of AEBS head studs but the box says "Head Stud Kit B16" p/n 201-HS16. Will these work for my B18c1 with GS-R head? Or do I have to get some for the B18C1?
Also, the ones I have don't have the allen holes to torque them down. How can I torque them down? Also if I can use them what do I use to install them just reg motor oil?
Some have moly lube already on them do I just wipe it off. No they were never installed on any motor yet. I got them from someone that was gonna put them in, but then decided to use ARP instead.
Also, the ones I have don't have the allen holes to torque them down. How can I torque them down? Also if I can use them what do I use to install them just reg motor oil?
Some have moly lube already on them do I just wipe it off. No they were never installed on any motor yet. I got them from someone that was gonna put them in, but then decided to use ARP instead.
Honda-Tech Member
Joined: Nov 2001
Posts: 5,699
Likes: 0
From: Southern cali or boston
Re: AEBS Head Stud Question (FastAssEG)
yah they will work
use whatever aebs recommends recommends for lube
to tighten them down, double nut them... tighten down to about 10-15ft/lbs
the cool thing about the aebs is the pencil tips which stops them from bottoming out the stud and keeps pressure even on the threads
Modified by irev210 at 9:35 AM 1/3/2004
use whatever aebs recommends recommends for lube
to tighten them down, double nut them... tighten down to about 10-15ft/lbs
the cool thing about the aebs is the pencil tips which stops them from bottoming out the stud and keeps pressure even on the threads
Modified by irev210 at 9:35 AM 1/3/2004
Thread
Thread Starter
Forum
Replies
Last Post
boostedekhatch1
Forced Induction
19
Jun 17, 2010 05:19 PM