Accidentally seperated knock sensor
Thread Starter
Honda-Tech Member
Joined: Aug 2002
Posts: 153
Likes: 0
From: Charleston, SC
Accidentally seperated knock sensor
When pulling the plug off of the knock sensor I accidentally broke the black housing off of it.( the sensor is now in two pieces) Would it be possible to re-solder the two little connections on the inside?... or more importantly, would the sensor work correctly if i did this? Thanks in advance everyone.
Jason
Jason
Honda-Tech Member
Joined: Feb 2002
Posts: 1,023
Likes: 0
From: Milky Way
Re: Accidentally seperated knock sensor (SC94DB8)
Jason,
Thought I would share a thought...............
Considering the critical nature of the knock sensor, would you really want to take the risk of repair? Do you have an OBD-II Scanner to verify your repair?
Without a picture, it would be difficult to give a difinitive answer on the repair of your sensor damage. You need to balance the cost of a new sensor versus the cost of the engine detonating without proper feedback and control.
Regards,
BigMoose
Thought I would share a thought...............
Considering the critical nature of the knock sensor, would you really want to take the risk of repair? Do you have an OBD-II Scanner to verify your repair?
Without a picture, it would be difficult to give a difinitive answer on the repair of your sensor damage. You need to balance the cost of a new sensor versus the cost of the engine detonating without proper feedback and control.
Regards,
BigMoose
Thread
Thread Starter
Forum
Replies
Last Post
hoezee
Honda Civic / Del Sol (1992 - 2000)
4
Oct 6, 2008 10:40 AM
S2K Luver
Mid-Atlantic (Sales)
4
Mar 18, 2007 05:46 PM